Главная Выпуски журнала 2023 №6 (128) 2023 «Маркшейдерия и недропользование»

№6 (128) 2023 «Маркшейдерия и недропользование»

24 Декабрь 2023
Печать
Маркшейдерия и недропользование - журнал для специалистов горной промышленности

«Маркшейдерия и Недропользование»
№ 6 (128), ноябрь-декабрь 2023 г.

В номере:

  • Итоги научных конференций
  • Техника и технология недропользования
  • Маркшейдерское и геологическое обеспечение горных работ
  • Горные машины и оборудование
  • Горнoтехническая безопасность
  • Геомеханика
  • Физика горных пород и процессов
  • Обогащение полезных ископаемых
  • Экология

 

Содержание №6 (128) ноябрь-декабрь 2023 г.
журнала «Маркшейдерия и Недропользование»

 

Итоги научных конференций
Results of scientific conferences

Итоги Международной конференции «Современные проблемы комплексной и глубокой переработки природного и нетрадиционного минерального сырья» (Плаксинские чтения-2023) с. 04

Решение XII Научно-практической конференции «Комбинированная геотехнология: комплексное освоение техногенных образований и месторождений полезных ископаемых» с. 09

 

Техника и технология недропользования
Methods and technology of mineral resources exploration

К.Н. Залевская, А.Е. Кирков
Оценка качества породного массива на угольных разрезах Kузбасса по данным телеметрии буровзрывных скважин с. 13
В статье приведены результаты предварительной оценки качества массива горных пород в пределах буровзрывного блока на базе анализа данных телеметрии скважин при планировании добычных работ. По данным моделирования блока БВР установлены корреляционные связи между параметрами бурения скважин – скоростью бурения, крутящим моментом и усилием подачи, позволяющие предварительно оценить степень его структурной нарушенности для совершенствования и оптимизации схемы ведения взрывных работ при разработке угольных месторождений Кузбасса, а также прогнозирования интенсивности возможного пылеообразования еще на начальной стадии производства взрывных работ.
угольный разрез, буровзрывные работы, параметры бурения, телеметрия скважин, структурная нарушенность, трещиноватость массива, открытая разработка, прогноз пылеообразования.
K.N. Zalevskaya, A.E. Kirkov
Assessment of the quality of the rock mass at the Kuzbass coal mines according to the telemetry data of drilling and blasting wells
The article presents the results of preliminary assessment of rock massif quality within a drilling and blasting block based on the analysis of well telemetry data during planning mining operations. According to the modeling data of the Block, correlation relations between the variable parameters of borehole drilling – drilling speed and torque – are established, which allow preliminary estimating the degree of its structural disturbance to improve and optimize the blasting scheme for the development of coal deposits in Kuzbass, as well as predicting the intensity of possible dust formation at the initial stage of blasting. drilling parameters, borehole telemetry, coal section, structural disturbance, fracturing, open pit mining, drilling and blasting, dust formation prediction.

 

Маркшейдерское и геологическое обеспечение горных работ
Surveying and geological support of mining operations

М.Б. Нурпеисова, Б. Мынгжасаров, Д.М. Киргизбаева, Ж.М. Нукарбекова
Исследование влияния метеорологических факторов на точность геодезических измерений с. 18
В статье приведены результаты исследований факторов, влияющих на результаты геодезических измерений при мониторинге гидротехнического сооружения Северо-Каспийского морского канала. Выявление факторов, влияющих на геодезических измерений и их учет, позволяет повысить точность мониторинга инженрных сооружений. Приведены результаты, проведенного геодезического мониторинга причальных сооружении оптическими приборами, в том числе электронным тахеометром. Усовершенствован метод контроля деформаций, который привел к улучшению методов и видов геодезических инструментов в автоматизированных системах мониторинга. Полученные результаты использованы диссертационных работах докторантов, а также в учебном процессе Satbayev University.
Каспийский морской канал, причальные сооружения, деформации объектов, геодезическая сеть, мониторинг, геодезические приборы, оценка точности
M.B. Nurpeissova, B. Mingzhasarov, D.М. Kyrgizbaeva, J.M. Nukarbekova
Investigation of the influence of meteorological factors on the accuracy of geodetic measurements
The article presents the results of studies of factors affecting the results of geodetic measurements during monitoring of the hydraulic structure of the North Caspian Sea Canal. Identification of factors affecting geodetic measurements and their accounting allows to increase the accuracy of monitoring of stationary structures. The results of geodetic monitoring of berthing structures by optical devices, including an electronic total station, are presented. The method of deformation control has been improved, which has led to the improvement of methods and types of geodetic instruments in automated monitoring systems. The results obtained were used in the dissertations of doctoral students, as well as in the educational process of Satbayev University. Caspian Sea Canal, mooring structures, deformations of objects, geodetic network, monitoring, geodetic instruments, accuracy assessment

 

Горные машины и оборудование
Mining machinery and equipment

Г.Г. Бурый
Исследование объёмов грунта, вовлекаемого с рабочим органом дорожно-строительной машины с. 29
В статье рассматривается актуальность определения объемов грунта вовлекаемого в процессе внедрения в него рабочего органа строительной машины. Рассматриваются способы определения объемов и их недостатки. Приводится устройство стенда позволяющего определить объемы вовлекаемого грунта в динамике. Рассматриваются свойства исследуемого грунта. Приводится схема полученных границ объемов вовлекаемого грунта.
строительно-дорожная машина, рабочий орган, свойства грунта, объем, моделирование, стенд для исследований, результаты.
G.G. Buriy
Investigation of the volume of soil involved with the working body of the road construction machine
The article considers the relevance of determining the volume of soil involved in the process of introducing a working body of a construction machine into it. The methods of determining volumes and their disadvantages are considered. The device of the stand allowing to determine the volumes of the involved soil in dynamics is given. The properties of the studied soil are considered. The scheme of the obtained boundaries of the volumes of the involved soil is given. stand, soil, construction machine, implementation, modeling

Г.Г. Бурый, И.К. Потеряев
Автоматизированный расчет потерь давления в гидролиниях гидропривода на примере бульдозера Liebherr PR 724 с. 33
В статье рассматривается актуальность подбора элементов гидропривода строительных и подъемно-транспортных машин. В настоящее время широкое распространение на строительных и подъемно-транспортных машинах получил гидравлический привод. В состав гидравлического привода входит гидродвигатель, который может представлять собой либо гидроцилиндр либо гидромотор. При подборе в процессе эксплуатации или во время проектирования данных агрегатов важно знать потери давления во всасывающей, напорной и сливной гидролиниях. Процесс определения этих потерь является весьма трудоемким. Для автоматизации процесса определения потерь давления во всасывающей, напорной и сливной гидролиниях возможно использование программ ЭВМ. В статье приводится программный код и методика автоматизированного расчета потерь давления в гидролиниях гидропривода строительных и подъемно-транспортных машин на примере бульдозера Liebherr PR 724. Программа написана на языке Microsoft Visual Basic Application и позволяет за долю секунды определить потери давления в гидролиниях, что очень актуально при многократных расчетах по подбору элементов гидропривода. Представлены параметры гидропривода рабочего оборудования бульдозера Liebherr PR 724 и результаты расчета потерь давления во всасывающей, напорной и сливной гидролиниях этого бульдозера. Описан принцип работы программы на примере бульдозера LIEBHERR PR 724.
бульдозер, гидропривод, потери давления, гидролинии, программа
G.G. Buriy, I.K. Poteryaev
Program for calculation of pressure loss in hydraulic drive lines on the example of bulldozer Liebherr PR 724
The article considers the relevance of the selection of hydraulic drive elements for construction and lifting and transport machines. Currently, hydraulic drive is widely used on construction and lifting machines. The hydraulic drive includes a hydraulic motor, which can be either a hydraulic cylinder or a hydraulic motor. When selecting during operation or during the design of these units, it is important to know the pressure losses in the suction, pressure and drain hydraulic lines. The process of determining these losses is very laborious. Computer programs can be used to automate the process of determining pressure losses in the suction, pressure and drain hydraulic lines. The article provides the program code and methodology for automated calculation of pressure losses in hydraulic lines of hydraulic drive of construction and lifting and transport machines using the example of the Liebherr PR 724 bulldozer. The program is written in Microsoft Visual Basic Application and allows you to determine pressure losses in hydraulic lines in a fraction of a second, which is very important for multiple calculations for the selection of hydraulic drive elements. The parameters of the hydraulic drive of the working equipment of the Liebherr PR 724 bulldozer and the results of calculating pressure losses in the suction, pressure and drain hydraulic lines of this bulldozer are presented. The principle of operation of the program is described using the example of the Liebherr PR 724 bulldozer. hydraulic drive, pressure loss, hydraulic lines, program, calculation

 

Горнoтехническая безопасность
Mountain-technical safety

А.В. Харченко, А.И. Докучаева
Анализ свойств углей и выделившегося газа при определении их газоносности и склонности к самовозгоранию с. 38
Высокое содержание метана в углях препятствует проникновению внутрь кислорода и, следовательно, их активному окислению и самовозгоранию. В работе проведена оценка состава газа, выделяющегося из угля, для определения газоносности углей и для оценки газовых компонентов, ответственных за возгорания угля. Показано, что для безопасного ведения добычных работ необходимо комплексно подходить к анализу состава газа, выделяющегося из угля. Результаты могут быть применены при прогнозе и предотвращении возникновения газодинамических явлений.
газоносность угольного пласта, самовозгорание угля, эндогенный пожар, механизм окисления угля, индикаторный газ, газохроматографический анализ
A.V. Kharchenko, A.I. Dokuchaeva
Analysis of the properties of coals and extracted gas in determining their gas content and propensity to spontaneous combustion
The high methane content in the coals prevents the penetration of oxygen inside and, consequently, their active oxidation and spontaneous combustion. The paper evaluates the composition of the gas released from coal to determine the gas content of coal and to assess the gas components responsible for coal ignition. It is shown, that in order to safely conduct mining operations, it is necessary to comprehensively analyze the composition of gas released from coal. The results can be applied in forecasting and preventing the occurrence of gas dynamic phenomena. gas content of the coal seam, spontaneous combustion of coal, endogenous fire, mechanism of oxidation of coal, indicator gas, gas chromatographic analysis

 

Геомеханика
Geomechanics

К.Н. Трубецкой, Н.А. Милетенко, В.Н. Одинцев, И.Е. Шиповский
К вопросу геомеханического обоснования разработки Горевского месторождения свинцово-цинковых руд с. 42
Горевское месторождение свинцово-цинковых руд является уникальным по запасам металлов и качеству руд, а также в отношении геомеханических и гидрогеологических условий разработки. Месторождение находится на берегу реки Ангара, часть рудных тел уходит под русло. Добыча руды ведется открытым способом, в перспективе планируется углубление карьера до глубины -435м и переход на комбинированный способ отработки месторождения. В настоящей работе отмечается, что увеличение глубины карьера может изменить деформированное состояние толщи пород и вызвать в ней развитие опасных деформационных процессов, которые в свою очередь могут вызвать проникновение природной воды в горные выработки. Изложены некоторые разработки ИПКОН РАН по решению рассматриваемых вопросов. Предлагается использовать комплексный, междисциплинарный подход, сочетающий инженерные методы прогноза, основанные на производственном опыте, методы компьютерного моделирования разноплановых задач (сдвижение пород, формирование зон наведенной проницаемости массива, фильтрация, взрывное воздействие) и геомеханичекий мониторинг.
Горевское месторождение, открыто-подземный способ, сдвижение массива пород, трещиноватость, фильтрация воды
K.N. Trubetskoy, N.A. Miletenko, V.N. Odintsev, I.E. Shipovsky
To geomechanical substantiation of development of Gorevskoye deposit of lead-zinc ores
The Gorevskoye lead-zinc ore deposit is unique in terms of metal reserves and ore quality, as well as in terms of geomechanical and hydrogeological development conditions. The deposit is located on the banks of the Angara River, part of the ore bodies goes under the channel. Ore mining is carried out by an open method, in the future it is planned to deepen the quarry to a depth of -435 m and switch to a combined method of mining the deposit. It is noted in this work that increasing the depth of the quarry can change the deformed state of the rock column and cause the development of dangerous deformation processes in it, which in turn can cause the penetration of natural water into mine workings. Some developments of the IPCON RAS on the solution of the issues under consideration are outlined. It is proposed to use a comprehensive, interdisciplinary approach that combines engineering methods of forecasting based on production experience, methods of computer modeling of diverse problems (rock displacement, formation of zones of induced permeability of the massif, filtration, explosive impact) and geomechanical monitoring. Gorevskoye field, open-pit method, rock mass displacement, fracturing, water filtration

В.С. Федотенко, А.П. Аверин, А.Е. Кирков
Использование дистанционных методов для изучения структурной нарушенности массива по данным исследования стенок буровзрывных скважин с. 54
В статье приведены результаты исследования возможности применения дистанционных методов для изучения структурной нарушенности массива горных пород по результатам телеметрических наблюдений стенок буровзрывных скважин. Описаны общие положения разработанной методики выполнения калибровки различных вариантов оборудования для видео и фотофиксации стенок скважин. Общие принципы измерений элементов залегания структур, выделяемых на цифровых изображениях, базируются на основных математических законах центральной проекции. Результаты физического моделирования подтвердили высокую точность получаемых результатов.
структурная нарушенность, дистанционные методы, элементы залегания, угол падения
V.S. Fedotenko, A.P. Averin, A.E. Kirkov
Use of remote sensing methods to study the structural disturbance of the massif based on the data of drill and blast well wall surveys
The article presents the results of the study of the possibility of using remote sensing methods to study the structural disturbance of rock massif based on the results of telemetric observations of the walls of drilling and blasting wells. The general provisions of the developed methodology of calibration of different variants of equipment for video and photo fixation of borehole walls are described. The general principles of measuring the elements of structure occurrence, highlighted on digital images, are based on the basic mathematical laws of central projection. The results of physical modeling confirmed high accuracy of the obtained results. structural disturbance, remote sensing methods, elements of occurrence, dip angle

Д.Н. Радченко, Р.В. Бергер, В.И. Татарников, П.О. Зубков
Экспериментальное исследование характера и последствий взаимодействия соляных пород с гидрозакладочными рассолами при подземной разработке месторождений калийных солей с. 60
Дана оценка влияния рассолов обогатительной фабрики по переработке калийного минерального сырья относительно отобранных кернов сильвинита. Установлены закономерности изменения прочностных характеристик образцов сильвинита на одноосное сжатие в «сухом» состоянии и после продолжительного замачивания в насыщенном рассоле обогатительной фабрики.
месторождение калийных солей, сильвинит, карналлит, прочностные характеристики, гидрозакладка, рассолы, закладочный массив
D.N. Radchenko, R.V. Berger, V.I. Tatarnikov, P.O. Zubkov
Experimental study of the nature and consequences of interaction of salt rocks with hydrofilling brines during underground development of potassium salt deposits
Introduction. The research methodology included selection and comparative tests of strength characteristics of the initial core of sylvinite and carnallite in air-dry condition and, respectively, core samples after their contact with model hydrofilling brines. During the tests on the press under uniaxial compression load it was noted that most of the samples are very heterogeneous, characterized by layering and the presence of various inclusions, varying even within the same well. The specimens differ in the character of deformation at compression failure. It seems that the character of contact of targets with hydrofilling brines is different than in the soil of mine workings, through which drainage brines will flow, where the processes of frizzling have been revealed, indicating the influence on the development of fracturing of sylvinite protective pack in the soil and on the side walls of targets. The obvious risk of drainage brines penetrating into the cracks and the nature of their movement through the soil of the workings require full coverage of the sylvinite samples with brine from all sides. Research results. It is established that as a result of contact of samples of sylvinite rocks with saturated brine there is a decrease in strength characteristics by 1.2-1.7 times. It is determined that as a result of contact with model brines the deformation diagram of samples under load has changed. Monolithic sample of carnallite after incubation for 58 days in concentrated salt brine there was a complete loss of strength and the sample crumbled in a measuring cup. On the basis of the performed researches it is concluded that at hydrofilling of the excavated space with saturated hydrofilling brines there will be a decrease in strength of the contour part of the massif of chambers, pillars and in the soil of drainage excavations. Conclusion. In the laboratory experiment the fact of decrease in uniaxial compression strength of salt rock samples was established: already on the 36th day of ageing in brine the strength of samples decreased by 24-25%, deformation modulus – by 22-28%. On 56 days the compressive strength of the specimen decreased on average by 2 times in comparison with the initial ones in air-dry condition. It is also proved that at carrying out of hydrofilling works with application of saturated brines there is a decrease in strength of rocks of the contour part of the massif of chambers and drainage excavations. For the chamber being laid these processes are not so critical, but the influence of hydrofill brines on the strength and deformation modulus reduction for the underlying rocks at the base of drainage excavations, through which the excess brine will flow. Reduced strength and deformation characteristics may result in an increased risk of accidents at the underground mine. Resume. The influence of brines of the potash mineral processing plant on selected sylvinite cores has been assessed. Regularities of change of strength characteristics of sylvinite samples on uniaxial compression in «dry» state and after prolonged soaking in saturated brine of the processing plant were established. potassium salt deposit, sylvinite, strength characteristics, hydrofilling, brines, embedding massif

 

Физика горных пород и процессов
Rocks and processes physics

И.Ф. Бондаренко, С.В. Ковалевич, Р.Я. Никитин
Оценка интенсивности сейсмических нагрузок от взрывных работ на охраняемые объекты Накынской нефтебазы с. 68
С целью оценки интенсивности сейсмических нагрузок от взрывных работ на углубленный фундамент с установленными на них стальными вертикальными резервуарами РВС-2000 для хранения нефтепродуктов в 2021 году авторами был выполнен инструментальный замер колебаний грунта на основании охраняемых объектов. При этом с помощью сейсмометрических методов была определена фактическая нагрузка на охраняемые объекты по шкале сейсмической интенсивности MSK-64 в натурных условиях производства БВР на карьерах Мирнинско-Нюрбинского горно-обогатительного комбината (МНГОК). По результатам проведенных исследований были разработаны рекомендации по определению параметров БВР, обеспечивающих сейсмическую безопасность резервуаров РВС-2000 Накынской нефтебазы.
буровзрывные работы (БВР), сейсмическая скорость колебания грунта, шкала сейсмической интенсивности MSK-64
I.F. Bondarenko, S.V. Kovalevich, R.Ya. Nikitin
Assessment of the intensity of seismic loads from blasting operations on the protected facilities of the Nakyn oil depot
In order to assess the intensity of seismic loads from blasting operations on a deep foundation of vertical steel tanks RVS-2000 installed in 2021 for storing petroleum products, the authors performed instrumental measurement of ground vibrations at the foundations of the protected facilities. The actual load on protected facilities was determined using seismometric methods, according to the MSK-64 seismic intensity scale in full-scale conditions of drilling and blasting operations at the Mirny-Nyurba MPD open pits. Based on the results of the study, recommendations were developed to determine the parameters of the drilling and blasting operations that ensure the seismic safety of the RVS-2000 tanks of the Nakyn oil depot. drilling and blasting operations (DBO), seismic velocity of ground motion, MSK-64 seismic intensity scale

 

Обогащение полезных ископаемых
Mineral processing

У.А. Бектибаев, Н.Ж. Жалгасулы, А.А. Исмаилова
Аспекты экологических требований при технологии кучного выщелачивания медных руд с. 77
В статье рассматриваются вопросы, посвященные процессу выщелачивания медных руд, которое ограничивается временем летнего периода и неподготовленности основании куч, что приводит к утечке продуктивных растворов, к потере металлов и загрязнению окружающей среды. Разработан способ интенсивного кучного выщелачивания окисленных руд, позволяющий комплексно извлекать полезные компоненты из трудно извлекаемой руды. На основании результатов проведенных исследований выполнен рабочий проект участка кучного выщелачивания оксидных медных руд Малого-Спасского карьера. Показано, что экономические показатели разработанной технологии значительно возрастают при комплексном использовании руды по сравнению с извлечением из нее только меди.
медная руда, создание кучи, растворители, кучное выщелачивание, металлы, окружающая среда
U.A. Bektibayev, N.J. Zhalgasuly, A.A. Ismailova
Aspects of environmental requirements in the technology of heap leaching of copper ores
The article discusses issues related to the leaching process of copper ores, which is limited by the time of the summer period and the unpreparedness of the base piles, which leads to leakage of productive solutions, loss of metals and environmental pollution. A method of intensive heap leaching of oxidized ores has been developed, which allows complex extraction of useful components from hard-to-extract ore. Based on the results of the conducted research, a working draft of the heap leaching site of copper oxide ores of the Maly-Spassky quarry was carried out. It is shown that the economic indicators of the developed technology increase significantly with the complex use of ore compared with the extraction of copper only from it. copper ore, heaping, solutions, heap leaching, metals, environment

 

Экология
Ecology

Ю.П. Галченко
Экологические аспекты депонирования минеральной пыли добывающих предприятий в поверхностных водотоках природных экосистем с. 82
Действующая технологическая парадигма развития минерально-сырьевого комплекса основана на разрушении вещества литосферы за счёт использования механической энергии или энергии взрыва, что неизбежно порождает мощный поток различных видов техногенных поллютантов, поступающий в атмосферу нашей планеты. При современной динамике изменения объёмов добычи полезных ископаемых масштаб этих поступлений угрожающе нарастает, обретая постепенно глобальный характер. Поиск путей устранения этих экологических проблем требует детального изучения не только физических процессов, порождающих твёрдые минеральные частицы при использовании горных технологий, но и, в первую очередь, тех особенностей их транзита и детонирования в геосферах Земли, которые превращают эти выбросы в экологическую проблему. В работе рассмотрены экологические аспекты загрязнения природных водотоков минеральной пылью от взрывной отбойки на горных предприятиях. Показано, что характер и форма взаимодействия техногенных и природных компонентов определяются не только применяемой геотехнологией, но и особенностями строения речной системы, климатом региона, расположение добывающих предприятий, а также – гранулометрическим и минеральным составом техногенных поступлений в водную среду. Выдвинута и разработана гипотеза о зависимости формы депонирования тонкодисперсных минеральных частиц в природных водотоках от климатических особенностей региона. Обоснована и впервые создана методика интегральной оценки последствий кумулятивного накопления минеральных взвесей в водной среде при различных схемах расположения добывающих предприятий. Доказано, что концентрация твёрдых частиц во взвесях возрастает прямо пропорционально снижению порядка водотока в общей иерархии речной системы.
добывающие предприятия, технологические аэрозоли, транзит, депонирование, природные экосистемы, структура, поверхностные водотоки, климат, седиментация, частицы, экологические последствия
Yu.P. Galchenko
Ecological aspects of mineral dust deposition of mining enterprises in surface watercourses of natural ecosystems
The current technological paradigm of the development of the mineral resource complex is based on the destruction of the substance of the lithosphere through the use of mechanical energy or explosion energy, which inevitably generates a powerful flow of various types of man-made pollutants entering the atmosphere of our planet. With the current dynamics of changes in the volume of mineral extraction, the scale of these revenues is threateningly increasing, gradually acquiring a global character. The search for ways to eliminate these environmental problems requires a detailed study of not only the physical processes that generate solid mineral particles when using mining technologies, but also, first of all, those features of their transit and detonation in the geospheres of the Earth that turn these emissions into an environmental problem. The paper considers the environmental aspects of pollution of natural watercourses with mineral dust from blasting at mining enterprises. It is shown that the nature and form of interaction of technogenic and natural components are determined not only by the applied geotechnology, but also by the features of the structure of the river system, the climate of the region, the location of mining enterprises, as well as the granulometric and mineral composition of technogenic inputs into the aquatic environment. A hypothesis has been put forward and developed on the dependence of the form of deposition of fine mineral particles in natural watercourses on the climatic features of the region. The method of integral assessment of the consequences of cumulative accumulation of mineral suspensions in the aquatic environment under various schemes of location of mining enterprises is substantiated and created for the first time. It is proved that the concentration of solid particles in suspensions increases in direct proportion to the decrease in the order of the watercourse in the general hierarchy of the river system. mining enterprises, technological aerosols, transit, deposition, natural ecosystems, structure, surface watercourses, climate, sedimentation, particles, environmental consequences

В.М. Кузнецов, Е.Б. Юрчевский, В.П. Спиридонов
Анализ безопасности эксплуатации атомных станций малой мощности (АСММ) при освоении горнорудных предприятий арктической зоны России с. 87
В статье приведены результаты исследований, анализа проектной документации и итогов эксплуатации прототипов ПАТЭС. Показано, что недра Арктической зоны России содержат значительный ресурсный потенциал критических металлов, необходимых для зелёных технологий, позволяющий создать новые предприятия или значительно увеличить объёмы производства на уже действующих. Установлено, что препятствуют реализации этого потенциала: отсутствие достоверной информации о количестве в рудах и концентратах известных месторождений попутных критических металлов; технологические вопросы извлечения и низкая рентабельность производства; формирование грузовой базы и энергетического обеспечения Северного морского пути. Определено, что детальное изучение содержания попутных критических металлов в рудах комплексных месторождений Арктической зоны России возможно при использовании плавучей атомной теплоэлектростанции (ПАТЭС) проекта 20870. Выявлено, что с соблюдением национальных и международных норм ядерной и радиационной безопасности и опыта эксплуатации атомного ледокольного флота и судовых ядерных паропроизводящих установвок (ЯППУ) ВМФ, не приведет к нарушению радиоэкологического равновесия в прибрежных и морских экосистемах в процессе её эксплуатации. Авторы статьи предлагают свой анализ радиационной и экологической безопасности эксплуатации ПАТЭС.
арктическая зона, месторождения критических металлов, плавучая атомная электростанция, экологическая безопасность
V.M. Kuznetsov, E.B. Yurchevsky, V.P. Spiridonov
Analysing the operational safety of low-power nuclear power plants (ASMM) in the development of mining enterprises in the arctic zone of Russia
The article presents the results of research, analysis of project documentation and the results of the operation of the prototypes of the NPP. It is shown that the subsoil of the Arctic zone of Russia contains a significant resource potential of critical metals necessary for green technologies, which allows creating new enterprises or significantly increasing production volumes at existing ones. It has been established that the lack of reliable information on the amount of associated critical metals in ores and concentrates of known deposits is hindering the realization of this potential; technological issues of extraction and low profitability of production; the formation of a cargo base and energy supply of the Northern Sea Route. It is determined that a detailed study of the content of associated critical metals in the ores of complex deposits of the Arctic zone of Russia is possible with the use of a floating nuclear thermal power plant (NPP) project 20870.It is revealed that in compliance with national and international standards of nuclear and radiation safety and operational experience of the nuclear icebreaker fleet and ship nuclear steam-producing installations (YAPPU) Navy, will not lead to a violation of the radioecological equilibrium in coastal and marine ecosystems during its operation. The authors of the article offer their analysis of the radiation and environmental safety of the operation of the NPP. Arctic zone, deposits of critical metals, floating nuclear power plant, environmental safety

С.С. Кубрин, А.А. Стрелецкий
Априорная и апостериорная оценки запыленности приземного слоя атмосферы в населенных пунктах Kемеровской области с. 101
В статье описаны результаты измерения запыленности приземного слоя атмосферы в населенных пунктах Кемеровской области до и после проведения массового взрыва на угольном разрезе. Приведены данные о дисперсном составе частиц пыли.
дисперсный состав, приземный слой атмосферы, массовый взрыв, седиментация частиц пыли, пылегазовое облако
S.S. Kubrin, A.A. Streletskiy
A priori and a posteriori estimates of the dustiness of the surface layer of the atmosphere in the settlements of the kemerovo region
The article describes the results of measuring the dustiness of the surface layer of the atmosphere in the settlements of the Kemerovo region before and after a mass explosion at a coal mine. Data on the dispersed composition of dust particles are presented. dispersed composition, surface layer of the atmosphere, mass explosion, sedimentation of dust particles, dust and gas cloud

С.С. Кубрин, А.А. Стрелецкий
Комплексная оценка запыленности приземного слоя атмосферы в границах горного отвода угольного разреза с. 106
В статье описаны результаты гравиметрического и электрического методов анализа запыленности атмосферы угольного разреза до и после проведения массового взрыва. Актуальность данного исследования обусловлена необходимостью вскрытия механизмов влияния метеорологических параметров региона, а также микроклимата угольного разреза на процесс формирования и дальнейшего распространения пылегазового облака в границах разреза и за его пределами. Определено влияние климатических условий и микроклимата разреза на траекторию распространения пылегазового облака в рамках карьера, путем установления прироста массы пробоотборников, расположенных в определенном секторе, а также путем проведения априорной и апостериорной оценок запыленности приземного слоя атмосферы. Результаты исследования могут быть использованы для установления новых эмпирических закономерностей, описывающих влияние метеорологических параметров на траекторию распространения пылегазового облака в атмосфере, а также для разработки новых методов мониторинга и контроля облака.
гравиметрический анализ, электрический анализ, запыленность, седиментация, массовый взрыв, буровзрывные работы, угольный разрез
S.S. Kubrin, A.A. Streletskiy
Comprehensive assessment of the dustiness of the surface layer of the atmosphere within the boundaries of the mining branch of the coal mine
The article describes the results of gravimetric and electrical methods for analyzing the dust content of the atmosphere of a coal mine before and after a mass explosion. The relevance of this study is due to the need to uncover the mechanisms of influence of the meteorological parameters of the region, as well as the microclimate of the coal mine on the formation and further spread of the dust and gas cloud within the boundaries of the section and beyond. The influence of climatic conditions and microclimate of the section on the trajectory of the dust and gas cloud propagation within the quarry was determined by determining the mass gain of samplers located in a certain sector, as well as by conducting a priori and a posteriori estimates of the dust content of the surface layer of the atmosphere. The results of the study can be used to establish new empirical patterns describing the influence of meteorological parameters on the trajectory of a dust and gas cloud in the atmosphere, as well as to develop new empirical patterns describing the influence of meteorological parameters on the trajectory of dust and gas cloud propagation in the atmosphere, as well as for the development of new methods of cloud monitoring and control. gravimetric analysis, electrical analysis, dustiness, sedimentation, mass explosion, drilling and blasting, coal mine

С.С. Кубрин, А.А. Стрелецкий
Влияние технологических параметров угольного разреза и метеорологических условий на скорость конвективных потоков воздуха, траекторию и дальность распространения пылегазового облака в атмосфере с. 111
В статье описаны результаты изучения параметров конвективного состояния атмосферы угольного разреза, показано их влияние на скорость восходящих потоков воздуха, а также приведены сведения о воздействии региональных метеорологических условий на траекторию и дальность распространения пылегазового облака образованного в результате проведения массового взрыва на угольном разрезе. Результаты исследования могут быть использованы для вскрытия механизмов формирования пылегазового облака, внесения корректировок в существующие методики расчета параметров облака, таких как высота подъема над поверхностью взрываемого блока, дальность и скорость его распространения, а также для разработки новых методов мониторинга и контроля облака.
угольный разрез, конвективное состояние атмосферы, метеорологические условия, пылегазовое облако
S.S. Kubrin, A.A. Streletskiy
Influence of technological parameters of a coal mine and meteorological conditions on the speed of convective air flows, the trajectory and range of propagation of a dust and gas cloud in the atmosphere
The article describes the results of studying the parameters of the convective state of the atmosphere of a coal mine, shows their effect on the speed of ascending air flows, and also provides information on the impact of regional meteorological conditions on the trajectory and range of propagation of a dust and gas cloud formed as a result of a mass explosion at a coal mine. The results of the study can be used to uncover the mechanisms of formation of a dust and gas cloud, to make adjustments to existing methods for calculating cloud parameters, such as the height of elevation above the surface of the exploding block, the range and speed of its propagation, as well as to develop new methods for monitoring and controlling the cloud. coal mine, convective state of the atmosphere, meteorological conditions, dust and gas cloud

 
Информация

Выставки и форумы одной строкой

Дата проведения: 20.06.2024 - 21.06.2024. Отраслевая конференция, посвященная вопросам строительства... далее
Дата проведения: 23.10.2024 - 24.10.2024. VII Международная научно-техническая конфере... далее
Дата проведения: 29.05.2024. в рамках Дня горнодобывающей отрасли выставки СТТ Expo–2024 состоит... далее

Котировки ЦБ

Курсы валют ЦБ РФ с 04.05.2024
 
Белорусский рубль
28.42 ▼(-0.04)
Доллар США
91.69 ▼(-0.36)
Евро
98.56 ▼(-0.08)
100 Казахстанских тенге
20.68 ▼(-0.14)
Канадский доллар
66.94 ▲(+0.03)
Китайский юань
12.70 ▲(+0.02)
10 Украинских гривен
23.19 ▼(-0.03)
Обновление: 2024-05-06 03:21:50
LME - Лондонская биржа цветных металлов цены ($/тн):
 
Нашли ошибку в тексте? Выделите ее и нажмите Ctrl + Enter